Fleetwood Procucts, Inc.
Fleetwood Procucts, Inc.

Products/Primers

Mipa 4+1 Acrylfiller HS

2K-HS-filler, a two component high solid filler which can be used as a high build primer surfacer or compact filler.

Thinner: Mipa 2K-Thinner

Hardener: H 5, H 10

Colors : Gray, black , white

Techsheet

Mipa Aktivprimer

2K-washprimer, chromate free, adhesive primer for non ferrous metal,

ratio 1:1 up to 2 : 1

Hardener: WPZ

Color: yellow green

Techsheet

Mipa P 60 S

Polyester-spray filler, incl. Hardener PS

Thinner: Mipa PE-Thinner

Color: grey

Techsheet

Mipa 2K-Transparent Sealer

Colourless 2K-adhesion promoter for coatings which were not sanded. Especially economical for recoating and for the application of lettering.

Mixing ratio 2:1 with Mipa 2K-Hardener MS 10, MS 25, MS 40

Thinner: Mipa 2K-Thinner

Techsheet

Mipa 2K-HS-Directfiller F31

Wet-on-wet filler in HS-Quality. Chromate-free, high stability, optimum levelling and excellent flow of the top coat

Mixing ratio: 3:1

Hardener: HS 5, HS 10

Thinner: Mipa 2K-Thinner

Color: gray

Techsheet

Mipa 2K-HS-Filler F41

Sanding filler in HS-Quality. Chromate-free, high stability and good filling power, easy to sand and does not sag / sink.

Mixing ratio 4:1

Hardener: HS 5, HS 10

Thinner: Mipa 2K-Thinner

Color: light gray

Techsheet

Mipa 2K-Primer AZ dunkelgrau

2K-Acrylic primer darkgrey with universal adhesion on iron, steel, galvanized steel and aluminium. Possible to overcoat with Polyester-spray filler or putty.

Mixing ratio 4:1

Hardener: MS 10,

Thinner: Mipa 2K-Thinner fast / normal

Color:dark gray

no Techsheet at this time

Mipa 2K-HS-Fillprimer

2K-HS-Wet-on-wet-filler especially suited for an economic painting of new parts and for value-for-money repairs. Very good stability and overspray absorption, excellent flow and fast overcoatability.

Mixing ratio 4:1 with Mipa 2K Hardeners H 5, H 10, MS 25

Thinner: Mipa 2K-Thinner

Techsheet

Mipa EP-Grundierfiller

Chromate free, primer on epoxy resin base for steel, alu, galvanized and powder-coated surfaces

ratio 2 : 1

Hardener: E 10, E 25

Thinner: EP

Color: light gray

Techsheet

Mipa WBS EP-Grundierfiller

Water-based, very good sandable epoxy spray filler. Can be applied in high coat thickness without the danger of pin holes. Recoatable with all solvent or water-based Mipa top coats. High anti-corrosive protection.

VOC < 250 g/l

Mixing ratio: 4:1

Hardener: Mipa WBS EP-Hardener

Thinner: Mipa WBC-Thinner

Techsheet

Mipa Rapidprimer

1K-adhesive primer.

Weldable according to DVS 0501

Thinner: 2K-Thinner fast

Techsheet

Mipa Rapidfiller

1K-primer filler, active anticorrosive protection, excellent adhesion

Thinner: 2K-Thinner fast

Techsheet

Mipa 1K WBS Grundierfiller

IK waterborne primer-surfacer, suitable with all common solvent and water-born Mipa 1K and 2K finishing paints. Fast drying and easy to sand. High anticorrosive protection, adhesion to iron, steel , aluminum, galvanized substrates and plastics

Mixing ration - up to 5% with WBS Verdeunning

Color: dark gray

Techsheet